top of page
Brand new and sealed OLED I2C White, Yellow, Blue or Blue & Yellow 0.96" SSD1306 for Arduino projects, the green/red tab on the right in some of the photo's is to remove the screen protection film. UK stock, 1st Class Post.
 
The pictures show the display being driven by an Arduino NANO, it is relatively easy to set up just 4 pins, GND, VDD, SCK & SDA.
 
1:GND(OLED power supply) Display pin GND ----> Arduino GND
2:VCC (OLED 3.3~5V) Display pin VDD -----> Arduino 3V3
3:SCK(OLED IIC Clock line) Display pin SCK -----> Arduino A5
4:SDA(OLED IIC Cable Display pin SDA -----> Arduino A4
 
I've put some photo's up to illustrate the above.
 
If you test it with the Adafruit SSD1306 128X64 Sketch it won't work, you need to edit line 59 and change the default I2C address from 0x3D to 0x3C,  line 59 should then be:-
 
if(!display.begin(SSD1306_SWITCHCAPVCC, 0x3C))

0.96" SSD1306 128x64 Arduino OLED Display I2C Blue, Yellow,Blue & Yellow

£3.85Price
Quantity

  • New: A brand-new, unused, un-opened and undamaged item in original retail packaging (where packaging is applicable). If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. See the listing for full detail.

bottom of page