top of page
Terrific ST7789 240x240 SPI display.  Nice size for use around the home or workshop.
 
NOTE:  3.3V!  Vcc
 
Cinch to use..  Adafruit has c routines to handle the timing for you.  You'll need:
 
Adafruit_GFX.h
Arduino_ST7789.h
SPI.h
 
No CS pin, so instantiate via: "Arduino_ST7789 tft = Arduino_ST7789(TFT_DC, TFT_RST)"
 
John Blaiklock has also coded a library and examples for 32-bit STM processors!
 
Specification:
  • 100% brand new with high quality
  • Size: Approx.1.3inch 
  • Weight: Approx.6.1g
  • Display Mode: Normally black IPS
  • Display Format: Graphic 240RGB*240 Dot-matrix
  • Input Data: SPI interface
  • Drive IC: ST7789VW
  • Dimensional Outline: Apptox.27.78 x 39.22 x 3.0+/-0.1mm (W x H x T)
  • Resolution: 240RGB*240 Dots
  • LCD Active area: 23.4 (W)*23.4 (H)
  • Dot pitch: 0.0975(H) x 0.0975(V) mm
  • Viewing Direction: All View
  • Operating Temperature: -20～70°C
 
Pins:
  • GND: Ground
  • VCC: Power 3.3V
  • SCL: Serial clock pin.
  • SDA: Serial data input
  • RES: LCM Reset pin
  • This pin is reset signal input. When the pin is low, initialization of the chip is executed. Keep this pin pull high during normal operation.
  • DC: Data/Command Control
  • BLK: Backlight control pin
 
Package Included:
  • 1 x IPS LCD Display Module

1.3" ST7789 240x240 SPI Colour IPS TFT LCD Screen Display STM32 Arduino UK STOCK

SKU: I4
£7.25Price
Quantity

  • New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable). If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. See the seller's listing for full detail

bottom of page