top of page
Description:
Instructions for setting the Throttle stroke calibration:
1.Connect the ESC with motor, another end connect with receiver.
2.Turn on the remote controller and push the throttle to the highest point
3.Plug the ESC into batteries
4.There has double click sound (the highest point of the throttle confirm)
5.After get the click sound take the throttle stick to the lowest point
6.Confirm the three click sound that means OK
Note: The three lines of the brush-less ESC can be connected at will. If the steering is not correct, you can adjust any two of them. 
 
 
 
Features:
 
1.Safe power arming program ensures motor will not run accidentally after turn on.
2.Low voltage auto setting based on battery.
3.Auto motor cutoff with reset.
 
Specifications:
30A ESC :
 
  • Size: 57mm x 25mm x 8mm
  • Sustaining Input Voltage: 6-12V
  • BEC Output Current: 5V/3A
  • Continuous Output Current: 20A, 30A, 40A
  • Max Current: 35A/12s
  • Weight:25g
 
Package Includes:
 
  • 1 x selected Brushless ESC
 
Attention!
When first time to use this ESC and motor replacement or you are not skilful or professional to play RC Plane Quadcopter Helicopter, Please follow the steps listed above to set your throttle stroke calibration. Otherwise incorrect operating will cause ESC hot, smoke or burn.

20A, 30A, 40A Brushless Motor Speed Controller ESC RC Drone Plane Quadcopter

£6.60Price
Quantity

  • New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable). If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. See the seller's listing for full detail

bottom of page