Arduino Mega2560 compatible
This is an Arduino Mega2560 compatible board, with a 16 MHz Atmel ATMega2560 processor and a CH340G USB driver.
It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analogue inputs, 4 UARTs (hardware serial ports), an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
This board uses the CH340G USB to serial chip, and is fully supported by the Arduino IDE (although additional drivers are needed for the USB interface - see below).
Orders received before 2pm on normal weekdays will be posted the same day. Orders received later or on public holidays/weekends will be posted the next business day. We will post Royal Mail 2nd Class at no charge. If you want faster delivery, please ensure you select Royal Mail 1st Class - or if you are really in a hurry there is an option for guaranteed delivery by 1pm the next business day.
Technical details:-
Specifications |
|
Size | 100mm x 55mm x 15mm (USB overhangs 10mm) |
Input Voltage | 7-9V recommended (or USB) |
Digital Input/Outputs | 54 (14 PWM capable) |
Analog Inputs | 16 x 10-bit resolution inputs |
Maximum output current | 40mA per pin |
USB | USB Type B with CH340G interface. |
Flash Memory | 256 Kb (8KB is used by the bootloader) |
Drivers are required for the USB interface on both Windows and OSX (linux systems should not require anything).
The USB to serial chip used is a CH340G, a commonly used device. Drivers for this chip are freely available online.
Ebay does not allow us to include links to documentation or drivers on our listings, but searching for "CH340G USB driver" should lead to suitable drivers.
A driver should not be required on Linux systems.